CapxuleCapxule

Not affiliated with the FAA. Original questions based on the current text of 14 CFR Parts 39, 43, 65 and 91 on eCFR (current as of 2026-10-26), FAA Advisory Circular 43.13-1B (Change 1) and the FAA Aviation Maintenance Technician Handbook – General (FAA-H-8083-30B).

FAA Inspection Authorization (IAR) knowledge test: practice test with original questions

Practice for the FAA Inspection Authorization (IAR) knowledge test with 71 original questions written from the current 14 CFR Parts 39, 43, 65 and 91, AC 43.13-1B and the FAA AMT handbook. Mock tests follow the published rule: 50 questions, 35 correct to pass.

يتكون امتحان «FAA Inspection Authorization (IAR) knowledge test» من 50 سؤالًا، ويتطلب النجاح 35 إجابة صحيحة. كُتبت هذه الأسئلة التدريبية (71) استنادًا إلى AC 43.13-1B, Acceptable Methods, Techniques, and Practices: Aircraft Inspection and Repair (with Change 1) (1998, Change 1) وتم التحقق منها في 28‏/10‏/2026.

يغطي: 14 CFR Parts 39, 43, 65 and 91 as of 2026-10-26; AC 43.13-1B Change 1; AMT Handbook FAA-H-8083-30Bتم التحقق من حداثته في 28‏/10‏/2026اللغات: English

71 أسئلة · الأوضاع: دراسة, تدريب حسب الموضوع, امتحان تجريبي, 5 يوميا

امتحان تجريبي: 50 سؤالا، النجاح عند 35

افتح الكبسولة الكاملة

عن هذا الاختبار

Practice for the FAA Inspection Authorization (IAR) knowledge test with original questions written from the current text of 14 CFR Parts 39, 43, 65 and 91 on eCFR (current as of 2026-10-26), FAA Advisory Circular 43.13-1B (Change 1) and the FAA Aviation Maintenance Technician Handbook – General (FAA-H-8083-30B). Every correct answer is backed by a passage of the source and checked by two independent verifiers.

  • Study: every question with a short explanation.
  • Topic drills: inspection authorization privileges and limits, maintenance, alterations and records, airworthiness directives and inspections, acceptable methods and practices.
  • Mock test: 50 questions, 35 correct (70%) to pass, as the FAA Airman Knowledge Testing Matrix (revised 9/25/26) states for test IAR.

The questions are written in our own words; this is not the FAA’s question bank. Chart, figure and computer questions that need images are not included.

المواضيع

  • Active maintenance experience · 1
  • AD definition · 1
  • AD publication · 1
  • AD versus service document · 1
  • Airframe major alterations · 1
  • Airworthy inspection statement · 1
  • Alternative method approval · 1
  • Altimeter system test interval · 1
  • Annual versus 100-hour · 1
  • Application · 1
  • Bolt material limits · 1
  • Cabin and cockpit group inspection · 1
  • Changing fixed base · 1
  • Control cable inspection · 1
  • Cotter pin reuse · 1
  • Discrepancy list · 1
  • Drilled head bolts · 1
  • Entitlement · 1
  • Expiration date · 1
  • Final torque · 1
  • Form 337 on board · 1
  • Form for major repairs · 1
  • Hardware traceability · 1
  • IA ratings and certificate time · 1
  • Inspection checklist · 1
  • Life-limited part definition · 1
  • Locking bolts and reuse · 1
  • Lock washers · 1
  • Loss of effectiveness · 1
  • Marking exhaust parts · 1
  • Missed first-year activity · 1
  • Modified products · 1
  • Nylon-jacketed cable · 1
  • Office for AMOC information · 1
  • Operating after maintenance · 1
  • Operating without AD compliance · 1
  • Owner inspection duty · 1
  • Pilot preventive maintenance approval · 1
  • Preparation for annual · 1
  • Progressive inspection supervision · 1
  • Propeller group inspection · 1
  • Record retention · 1
  • Relief for expired IA · 1
  • Renewal evidence · 1
  • Repairman and return to service · 1
  • Repeat violations · 1
  • Resuming privileges · 1
  • Returning a suspended IA · 1
  • Return-to-service entry prerequisite · 1
  • Return to service privilege · 1
  • Routine versus detailed inspection · 1
  • Safety wire ends · 1
  • Safety wire on emergency equipment · 1
  • Safety wire size · 1
  • Safety wire tension · 1
  • Self-locking nut service life · 1
  • Short-held authorization · 1
  • Thread protrusion · 1
  • Tire removal criteria · 1
  • Torque effects · 1
  • Torque wrench calibration · 1
  • Transfer of life-limited parts · 1
  • Turbine engine run · 1
  • Useful load · 1
  • Washers for grip length · 1
  • Welding fuel tanks · 1
  • What an AD requires · 1
  • Wheel bearing nut · 1
  • When ADs are issued · 1
  • Who may approve return to service · 1
  • Wing assembly inspection · 1

المصادر والإصدار

يغطي: 14 CFR Parts 39, 43, 65 and 91 as of 2026-10-26; AC 43.13-1B Change 1; AMT Handbook FAA-H-8083-30B · تم التحقق من حداثته في 28‏/10‏/2026

اختبارات تدريبية ذات صلة

كل الاختبارات التدريبية: الطيران

كيف صُنعت هذه الصفحة

مبنية على المصادر أعلاه، وروجعت قبل نشرها. حين تسمح رخصة المصدر تحتفظ الأسئلة بصياغة المصدر؛ وإلا فهي أسئلة أصلية مبنية على المصدر. كل إجابة تعرض مصدرها. هذا ليس استشارة قانونية أو هجرة أو طبية أو مالية.

كيف تُصنع الكبسولات · الشفافية حول الذكاء الاصطناعي · سجل التصحيحات